Aqua Topcoat EP 150 TC

Transparent, matt, water emulsified, solvent-free, unfilled, low-emission, two-component reactive resin based on epoxy resin. Good resistance to oils, greases, diluted lyes and diluted acids.

Consumption
Approx. 0.15 kg/m²

Packaging
10 kg, A+B comp. – EUR 284,59

 

* The terms of the contract and the right of withdrawal can be found in the Documents section.

 

* This product is one of the regulations of the Cabinet of Ministers No. 255, 22nd article exceptions, where the customer cannot exercise the right of withdrawal.

284,59

Transparent, matt, water emulsified, solvent-free, unfilled, low-emission, two-component reactive resin based on epoxy resin. Good resistance to oils, greases, diluted lyes and diluted acids.
Indoors and outdoors for areas which are walked or driven on as seal, for example, for chipped coatings and seals, based on epoxy resin.

Recommended tools:
slow-rotating electric agitator, suitable mixing vessel, brush, roller, paint grid, airless sprayer.

Mixing:
component A and component B are basically delivered in the relevant correct mixing ratios. A scale must be used to determine partial quantities. Thoroughly mix component A via a slow-rotating electric agitator (approx. 300 rpm), then add component B and continue mixing until a homogeneous, lump-free consistency is reached (approx. 2-3 minutes). To prevent mixing and/or proportioning mistakes, the mixed material must be decanted into a clean, dry container (repotted) and stirred thoroughly again.

Processing:
the mixed product is applied with a suitable tool. Roll cross-wise.

 

Storage

Store in a dry, well-ventilated place at a temperature between 15 ° C and 25 ° C. Protect from heat and direct sunlight. Keep tightly closed.

Gallery