
Polyurethane coating PU 300
Solvent-free, glossy, self-levelling, static crack-bridging, impact noise-reducing, two-component polyurethane-based reactive resin.
Consumption
Approx. 1.35 kg/m² per mm
Packaging
25 kg, A+B comp. – EUR 539,06
* The terms of the contract and the right of withdrawal can be found in the Documents section.
* This product is one of the regulations of the Cabinet of Ministers No. 255, 22nd article exceptions, where the customer cannot exercise the right of withdrawal.
€539,06
Description
Documents
Solvent-free, glossy, self-levelling, static crack-bridging, impact noise-reducing, two-component polyurethane-based reactive resin.
For the production of coloured, industrial floors which can be walked and driven on with medium to heavy load on cement-bound substrates or hard mastic asphalt screeds.
Recommended tools:
slow-rotating electric agitator, suitable mixing vessel, trowel, smoothing trowel, spatula, micro paint roller, hand or surface rake, rubber broom, de-aeration roller.
Mixing:
component A and component B are basically delivered in the relevant correct mixing ratios. A scale must be used to determine partial quantities. Thoroughly mix component A via a slow-rotating electric agitator (approx. 300 rpm), then add component B and continue mixing until a homogeneous, lump-free consistency is reached (approx. 2-3 minutes). To prevent mixing and/or proportioning mistakes, the mixed material must be decanted into a clean, dry container (repotted) and stirred thoroughly again.
Processing:
depending on the application, pour the material onto the pretreated substrate section by section and distribute across the entire surface with a suitable tool.
Storage
Store in a dry, well-ventilated place at a temperature between 15 ° C and 25 ° C. Protect from heat and direct sunlight. Keep tightly closed.