Classic 100ProOil

Classic 100ProOil is an ecological deep impregnation system with 100% solid content. It is based on natural sustainable resources. Discreet brilliance and good resistances distinguish this oil/wax combination. Classic 100ProOil meets the requirements of BGR 181 and DIN 51130 class R9 and R10 as to slip resistance.

Consumption
Approx. 25-50 m²/1l- first coat

Drying
Carefully walkable after approx. 10-12 h,do not load mechanically or with water before 8-14 days.

Packaging
1 l – EUR 56,63
5 l – EUR 257,97

Hardener
1 l – EUR 56,63
5 l – EUR 257,97

56,63257,97

Clear

Professionals only!Environmentally friendly deep impregnation oil for wooden floors based on refined vegetable oils and waxes. With a solid content of 100%, Classic 100ProOil is a top product within its category. In combination with Classic BaseOil resp. Classic BaseOil Color, Classic 100ProOil can be used as final coat. Classic 100ProOil is also applicable as a standalone oil- /wax impregnation. Giscode Ö10+
Degree of gloss
The gloss level of the finished surface depends on the finish, the method of operation and the follow-up orders. After polishing, a silk-matt look. Further orders and care measures may increase the gloss level.
Note
Keep soaked rags, pads and other working material in closed containers. Oil/wax in connection with sanding dust, cloth rags and the like must be moistened with water or deposited in a closed can or be disposed of in a safe way – danger of auto- ignition. The product itself is not auto-ignitive!
Application
Raw wood sanding must show a uniform but not too fine sanding pattern so that the wood will absorb a sufficient quantity of oil/wax. The raw wood sanding must show a uniform sanding pattern without any sanding mistakes. If necessary, a joining is recommended with AquaSeal® Pafuki, AquaSeal® PafukiPulver or PafukiSuper. Classic 100ProOil is uniformly applied using a trowel. After trowelling, remove the excess and polish with a disc sander. Layer formation has to be avoided in each case, that is, the surplus must be completely removed. If there is any joint sweating, polish again after approx. 1 h. After drying, especially for very absorptive wood species, a 2nd trowel coat may be required. A significantly reduced oil intake of the soil is to be expected. With the 10:1 addition of Classic Plus Reaktivvergütung (reactive compensation), drying inhibition can be reduced, hardening, resistance and blocking resistance are improved. Do not mix more material than can be processed within 2 h. Cleaning of the tools with Brillance Cleaner L91 KH- Verdünnung (thinner).
Drying
Standard climate 23°C/50% rel. humidity and air movement: – carefully walkable after approx. 10-12 h; – can be worked over after 24 h For wood with drying-inhibiting substances, insufficient ventilation, lower soil temperature, other air humidity and increased layer thickness drying can be significantly delayed. Do not load mechanically or with water before 8-14 days, cover with carpets or maintain.
Consumption
Depending on sanding, wooden substrate and method of floor covering:
Normally 30-50 g/m2 with oak in closed joint pattern as first coat, significantly less for the following coats. Very dry, strongly absorbent wood, floors with many joints and end-grain surfaces are applications in which significantly increased consumption can be present.
Use limitation
Floor with open, wide joints should not be treated with Classic 100ProOil because too much material is trowelled into the joints.

Similar goods