Express Coat EC 60

Solvent-free, glossy, quick-reacting, transparent, two-component reactive resin system for surface protection systems in industrial flooring area. For priming mineral substrates, as blinding layer for chip spreading, as well as for sealing full surface chipped layers.

Consumption
As primer approx. 0.3 – 0.4 kg/m² on mineral substrate as litter layer approx. 0.4 – 0.5 kg/m² for chip spreading Spreading chips approx. 0.5 kg/m² per full-coverage layer (in excess) as topcoat approx. 0.25 – 0.35 kg/m² on layers with chips removed
Packaging
2,5 kg, A+B comp – EUR 137,21
10 kg, A+B comp – EUR 468,15

137,21468,15

Clear

Solvent-free, glossy, quick-reacting, transparent, two-component reactive resin system for surface protection systems in industrial flooring area.
For priming mineral substrates, as blinding layer for chip spreading, as well as for sealing full surface chipped layers.
Recommended tools:
slow-rotating electric agitator, suitable mixing vessel, brush, roller, rubber broom, airless sprayer.
Mixing:
component A and component B are basically delivered in the relevant correct mixing ratios. A scale must be used to determine partial quantities. Thoroughly mix component A via a slow-rotating electric agitator (approx. 300 rpm), then add component B and continue mixing until a homogeneous, lump-free consistency is reached (approx. 2-3 minutes).
To prevent mixing and/or proportioning mistakes, the mixed material must be decanted into a clean, dry container (repotted) and stirred thoroughly again. In the course of this, quartz sand and/or suspending agents can be added if necessary.
Processing:
– apply first layer Express Coat EC 60 (consumption: approx. 400 g/m2) via smooth spatula or rubber broom, with a second person immediately afterwards rolling with a Micro paint roller and then remove chips (chips requirement: approx. 500 g/m2).
– before applying each further layer, wait until it can be walked on (approx. 1 – 2 hours), intermediately sand with sanding disk 60/80 and vacuum well.
– We recommend an overall design in min. 2 layers.
– on the (sanded and vacuumed) last layer, apply Express Coat EC 60 (as “topcoat” consumption: approx. 300 g/m2) via a smooth spatula or rubber broom, with a second person immediately afterwards rolling with a micro paint roller.

Similar goods