Natural stone covering resin PU 1K

Single component, solvent-free, dries in contact with air humidity and resistant to yellowing polyurethane resin for the production of natural stone carpet coverings.

Consumption
At 6 mm: 25 kg marble pebbles + 1.25 kg binding agent (sufficient for approx. 2 m²)
Color
Transparent
Packaging
1,25 kg – EUR 61,04
6,25 kg – EUR 297,28

61,04297,28

Clear

Single component, solvent-free, dries in contact with air humidity and resistant to yellowing polyurethane resin for the production of natural stone carpet coverings. In combination with Murexin marble pebbles, the binding agent forms a frost-dew cycle resistant, abrasion-proof, UV-resistant, non-slip surface after hardening.
Indoors and outdoors for decorative, porous natural stone carpet coverings in combination with Murexin marble pebbles Colorit coarse MG 24. Wide application spectrum in private, public and business areas, in particular terraces, pergolas, areas around pools, reception halls, living areas as well as sales, exhibition and presentation areas.

Recommended tools:
electric agitator, suitable mixing vessel, smoothing trowel, trowel, long smoothing trowel.

Mixing:
the desired colour mixture of marble pebbles is mixed at the given mixing ratios with natural stone carpet resin PU 1K. The binding agent is poured into the mixing vessel over the marble pebbles and thoroughly mixed with a slow running agitator (approx. 300 rpm). Then the mixture is decanted into a clean mixing vessel and mixed again.
The ratio of PU 1K to marble pebbles MG 24 is best matched with the specific surface of the marble pebbles MG 24. In exposed locations and for raised loads, we recommend increasing the proportion of binding agent to 1.4 kg.

Processing:
the mixed product is applied with a suitable tool.
For vertical surfaces, natural stone carpet resin PU 1K is mixed with approx. 7-8% suspending agent SN 1K and applied to the coating carrier without marble pebbles using a trowel.
Next, the natural stone carpet resin PU 1K mixed with suspending agent SN 1K is mixed with the marble pebbles MG 24 at a 1:10 mixing ratio (e.g.: 1.25 kg PU 1K + 7-8% SN 1K : 12.5 kg MG 24) applied wet-on-wet and smoothed.
Post-treatment:
A thin-layered topcoat PU 1K is possible via a micro paint roller (bracing grid).
For cleaning the hardened surfaces, we recommend products from the Murexin cleaning program. Loose dirt can be vacuumed with a vacuum cleaner. Dirt in the pores can be loosened by brushing the surface in combination with suitable cleaning agents and removed via wet vacuum cleaner.Post-treatment:
A thin-layered topcoat PU 1K is possible via a micro paint roller (bracing grid).
For cleaning the hardened surfaces, we recommend products from the Murexin cleaning program. Loose dirt can be vacuumed with a vacuum cleaner. Dirt in the pores can be loosened by brushing the surface in combination with suitable cleaning agents and removed via wet vacuum cleaner.Post-treatment:
A thin-layered topcoat PU 1K is possible via a micro paint roller (bracing grid).
For cleaning the hardened surfaces, we recommend products from the Murexin cleaning program. Loose dirt can be vacuumed with a vacuum cleaner. Dirt in the pores can be loosened by brushing the surface in combination with suitable cleaning agents and removed via wet vacuum cleaner.

Similar goods