Gepa-Bond K-555 — клей на спиртовой основе

Подходит для приклеивания на черные полы — цемент, выравнивающий состав на основе сульфата кальция, бетонные полы с подогревом, ДСП В-100, OSB, гипсовые панели.

Расход

Примерно от 1050 г до 1300 г на 1 м².

Время высыхания клея

Около 10 минут.

Упаковка

20 кг — EUR 71,87 (3,59 EUR/кг)

 

71,87

Solvent-based synthetic resin adhesive with very good adhesion, high initial strength and quick curing. Only indoors for gluing solid, multi-layered and mosaic parquet. Suitable for underfloor heating systems.
Recommended tools:
notched trowel B3, B5, PK/B11, B15.
Processing:
the adhesive must be applied to the whole surface of the substrate with a suitable notched trowel. Working time is approx. 15 minutes. The parquet must be laid in the adhesive bed with gentle sliding motions and pressed down firmly, so that the rear side of the parquet is fully covered with the adhesive. Cautiously walkable after approx. 24 hours. The laid parquet floor can be sanded for the first time after 48 hours at the earliest.
Working time:
approx. 10 — 15 min.
Final strength:
after approx. 48 hrs.
Consumption:
approx. 0.7 — 1.5 kg/m2 depending on parquet type and substrate.
Specific weight:
1,37 g/cm3.